Start recording by pressing the motion
picture button.
A Available recording time
B Elapsed recording time
•
Release the motion picture button right after you press it.
•
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
•
The recording state indicator (red) C will flash while
recording motion pictures.
•
The screen will become dark momentarily, and
recording will start after adjusting the display.
Stop the recording by pressing the motion picture button again.
•
Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL] (P26).
•
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
∫ About focusing
When [CONTINUOUS AF]
will maintain focus on that subject. To fix the focus position when beginning to record a
motion picture, set to [OFF].
Advanced (Recording pictures)
(P120)
is set to [ON], and you focus on a subject, the camera
- 85 -
A
B
C