Setting The Vcr's Clock - Panasonic NV-SJ410 Series Operating Instructions Manual

Setting the VCR's Clock

Usually, the VCR's Auto Setup or Download function
automatically adjusts the clock to the correct time.
Under some reception conditions, however, the VCR cannot
set the clock automatically.
In this case, follow the operation steps below to manually set
the clock.
To Manually Adjust the Clock
1 Press the MENU button
the Main menu on the TV screen.
2 Press the Cursor buttons (34)
to select "Clock".
≥ The Clock setting menu
appears on the TV.
3 Use the Cursor button (1)
setting menu, confirm that "Automatic" is set to "OFF",
and then press the OK button
4 Use the Cursor buttons
(3421) to set the date and
time.
≥ Instead of the Cursor buttons
(3421) , you can also use
the Numeric buttons
the date and time. (Set the
VCR/TV switch
5 Press the OK button
6 Press the EXIT button
34
to display
Main menu
Timer record
Display
Tuning
Clock
Functions
Language
Country
Satellite
to move to the Clock
.
Main menu
Timer record
Display
Tuning
Clock
Functions
Language
Country
Satellite
to set
to "VCR".)
to conclude the setting.
to exit the On Screen Display.
To Activate the Automatic Time Correction
Function
If a TV station transmits a signal for time setting, performing
the operation steps below activates the Automatic time
correction function and the time is corrected automatically.
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons (34)
≥ The Clock setting menu
appears on the TV.
3 Use the Cursor button (1)
Automatic: OFF
to move to the Clock
Time : 20:30:24
setting menu, and then use
Date : 16.10.05
the Cursor buttons (34)
to set "Automatic" to "ON".
4 Press the OK button
≥ Under adverse reception conditions, etc., the
Automatic time correction function may not work. In
this case, the indication for "Automatic" is
automatically reset to "OFF".
Automatic: OFF
If the reception conditions improve later on, it may be
Time : 20:30:24
possible to activate this function.
Date : 16.10.05
5 Press the EXIT button
Hints:
≥ If "Automatic" is set to "ON" when you open the Clock
screen, do not set it to "OFF", otherwise, the automatic time
correcting function is deactivated.
≥ The built-in clock employs the 24-hour system.
≥ In case of a power failure, an automatic back-up system
automatically maintains the operation of the clock for at
least 60 minutes.
≥ When "Automatic" on the Clock setting menu is set to "ON",
the automatic time correction function checks and if
necessary adjusts the time several times every day.
The automatic time correction function only works when
the VCR is switched off; it does not work in the timer
recording standby mode.
≥ If "Automatic" is set to "OFF" and "Power save" to "ON" (see
page 36), the time may not be maintained correctly. In this
case, manually adjust the clock.
≥ If "Automatic" is set to "ON" and "Power save" to "ON", the
Automatic time correction function does not work while the
VCR is turned off. However, as soon as it is turned on, the
Automatic time correction function is activated and the
clock is set correctly.
to display the Main menu on
to select "Clock".
Main menu
Timer record
Display
Automatic: ON
Tuning
Clock
Time :
Functions
Date
Language
Country
Satellite
to conclude the setting.
to exit the On Screen Display.
20:30:24
: 16.10.05