Network - Samsung BD-C8800A User Manual

BD Data Management
Enables you to manage the downloaded contents
from a Blu-ray disc that supports the BD-LIVE
service.
You can check the device information including
the storage size, delete the BD data.
Settings
Display
BD Data Management
Audio
Current Device
System
Total Size

Network

Available Size
Language
Delete BD Data
Security
General
Support " Select
Current Device : Displays the current device.
•
Total Size : Displays the total size of the device.
•
(Storage)
Available Size : Displays the available size of
•
the device. (Storage)
Delete BD Data : Press this to delete the BD
•
data.
NOTE
✎
▪
The total size of BD Data Management may differ,
depending on the conditions.
: HDD
: 1.92GB
: 1.79GB
\
' Return
Network
To begin setting up the network connection for
your product, follow these steps:
1.
In the Home menu, press the ◄► buttons
to select the Settings, and then press the
ENTER button.
2. Press the ▲▼ buttons to select Network, and
then press the ENTER button.
Settings
Display Network Settings
Audio Network Status
System Server Management
Network BD-Live Internet Connection : Allow(Valid Only)
Language
Security
General
Support
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button.
4. Press the ▲▼ buttons to select Network
Type, and then press the ENTER button.
5. Press the ▲▼ buttons to select Wired or
Wireless, and then press the ENTER button.
6.
Go to the next section.
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic, we
recommend using the Auto setting. This is the
easiest and will work in the majority of cases. If it is
static, you must use the manual set up procedure.
Directions for wired networks are below. Directions
for wireless networks are after the directions for
wired networks.
Wired Network
1.
In the Network Settings menu, press the ▲▼
buttons to select Network Settings, and then
press the ENTER button.
The Internet Protocol Setup screen appears.
2. Press the ► button, then select Auto or
Manual, and then press the ENTER button.
1
English