Connecting To A Network Router; Wireless Network; Wired Network - Samsung UBD-M9000/XU Full Manual

Connections

Connecting to a Network Router

You can connect your product to your network
router using one of the methods illustrated below.
The connection can be wireless or wired.

Wireless Network

Wall connection
| NOTES |
\ If your wireless router supports DHCP, this
product can use a DHCP or static IP address
to connect to the wireless network.
\ Set your wireless router to Infrastructure mode.
Ad-hoc mode is not supported.
\ The product supports only the following
wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/
AES), WPA2-PSK (TKIP/AES)
\ Select a channel on the wireless router that
is not currently being used. If the channel
set for the wireless router is currently being
used by another device nearby, it will result in
interference and communication failure.
\ If you select the Pure High-throughput
(Greenfield) 802.11n mode and set the
Encryption type on your router to WEP, TKIP or
TKIP-AES (WPS2Mixed), the product will not
support a connection in compliance with new
Wi-Fi certification specifications.
Router
POWER
16
English
\ Wireless LAN, by its nature, may cause
interference, depending on the operating
conditions (router performance, distance,
obstacles, interference by other radio devices,
etc).

Wired Network

Router or wall connection
OPTICAL
POWER MAIN
DIGITAL
( )
LAN
AUDIO OUT LAN HDMI OUT
| NOTES |
\ Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
\ DSL users, please use a router to make a
network connection.
\ Use Cat 7 (*STP Type) cable for the connection.
(* Shielded Twist Pair)