Settings Using The On Screen Display - Panasonic NV-SJ200 Series Operating Instructions Manual

Settings Using the On Screen Display

Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR.
≥ Press the VCR/TV button
NV-SJ200AM/AMC/AMM and NV-SJ208AMJ)
To Make Various Indicators Appear On
Screen Display
At a press of the OSD button
the following indications appear
on the TV screen.
≥ Press the OSD button
again to make the on
screen display disappear.
1 Programme position
2 Tape running display
Stop, Eject
Rewind, Review
Fast Forward, Cue
Playback
Still playback
Recording
Recording pause
Slow playback
Repeat playback
3 Present time/Tape counter/Remaining tape time/
Index Search/OTR indication/Play-Off Timer/Dew
Information
Present time
Tape counter
Remaining tape time
Index Search
OTR indication
Play-Off Timer
Dew (For NV-SJ200BD)
4 Tape speed indicator (SP/LP/EP)
5 Cassette-in indicator
14
to select the VCR mode. (For
1 2 3 4
,
CH 1 0:00.22
SP
PAL
STANDARD
6
5
1
;
¥
; ¥
F
R 1
Display
17:24
p2:35.47
REMAIN 2:34
S 01
OTR 60
OFFÁ 60
DEW
6 Colour system indicator
Any selected colour TV system except "AUTO" appears on
screen display. (See the To Set the Colour TV System on
this page.)
7 Picture mode indicator
At each press of the PICTURE MODE button
selected picture mode is set and following picture mode
indicators appear.
Example:
STANDARD: For TV Programme recorded
DYNAMIC: For Scenery, Sports
5
SOFT: For Rental soft tape
6
CARTOON: For Cartoon
7
Note:
≥ The on screen display may be disturbed or disappear
during special playback.
Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR.
≥ Press the VCR/TV button
NV-SJ200AM/AMC/AMM and NV-SJ208AMJ)
To Set the Colour TV System
1 Press the MENU button
display the Main menu on
the TV screen.
2 Press the Cursor buttons (34
to select "SYSTEM" then press the
ENTER button
3 Press the Cursor buttons (34
≥ The VCR automatically distinguishes between "PAL",
"SECAM/MESECAM" and "NTSC" signals. If the picture
lacks colour during AV external recording or playback,
set to "PAL", "MESECAM" or "NTSC".
≥ When you want to record or play back in black and
white, set to "B/W".
4 Press the MENU button
Display.
to select the VCR mode. (For
to
34) 34 34 34
.
to select "AUTO".
34) 34 34
34
twice to exit the On Screen
, the
SYSTEM
AUTO
PAL
MESECAM
NTSC
B/W
SELECT:
END :MENU