Automatic Play; Replacing The Stylus - Aiwa PX-E855ZZ Operating Instructions Manual

Automatic Play

1
Stylus guard
3

Replacing the Stylus

1
2
For 17 cm record
45 rpm adaptor (supplied)
4 5
2
Operate the unit according to steps 1 to 5.
1 Unlock the attachment for the tonearm
and detach the stylus guard.
2 Place a record on the turntable.
For a 17 cm record, use the supplied 45
rpm adaptor.
3 Choose the rotating speed.
4 Choose the size of the record.
5 Press START to begin play.
When the record has finished playing
When the tonearm reaches the end of the
record, it will automatically return to the arm
rest.
To lift the stylus during play
Press .
To stop during play
Press CUT.
Note
If you move the tonearm close to the center
while the turntable is rotating, the tonearm
may return to the armrest. Do not resist this
movement, as this may damage the
automatic return mechanism.
If the tonearm does not return to the armrest
during initial operation, press CUT. After
this, the tonearm automatically returns to
the armrest.
Manual Play
1. After step 4 above, press
2. Move the tonearm to the track which is
to be heard.
The turntable will now start rotating.
3. Press .
The tonearm will now lower onto the
record and play will start.
Replace the stylus after approximately 400
hours of use. An AN-11 replacement stylus
is available at your AIWA dealer. Handle this
delicate stylus with care.
En
.
5