Do you have a question about the PX-E860 and is the answer not in the manual?
Questions and answers
Luke Heist
January 31, 2025
Need directions on how to reinstall the belt
1 comments:
Mr. Anderson
February 10, 2025
To reinstall the belt on the Aiwa PX-E860 turntable, follow these steps:
1. Remove the Platter – If possible, lift the platter off the turntable to access the inner rim. 2. Place the Belt – Position the belt around the inner rim of the platter. 3. Reinstall the Platter – Put the platter back onto the turntable. 4. Align with Motor Pulley – Rotate the platter until one of the slots in the platter aligns with the motor pulley. 5. Attach the Belt – Use a straightened paperclip or a similar tool to pull the belt over the motor pulley through the slot. 6. Test the Turntable – Manually rotate the platter to ensure the belt moves smoothly, then power on the turntable to confirm proper operation.
This process ensures the belt is correctly installed and functioning.
This answer is automatically generated
Norman E Oldham
April 8, 2025
Is the Aiwa PX-E860 and PX-E 850 same service manual
Page 1
PX-E860 EZ(ST) 3 7 63 1515 0 SERVICE MANUAL L 13942296513 STEREO TURNTABLE SYSTEM SPECIFICATIONS This Service Manual is the “Revision Publishing” and replaces “Simple Manual” PX-E860<EZST>(S/M Code No.09-993-322-0T1). u163 S/M Code No. 09-993-322-0R3 http://www.xiaoyu163.com...
Page 6
http://www.xiaoyu163.com MECHANICAL EXPLODED VIEW 1/1 3 7 63 1515 0 SHIELD WIRE (WHITE) WIRE(BLK) GROUND SHEET SHIELD WIRE (RED) 10-1 10-2 U only K only STEEL CLAMPER EZ only L 13942296513 (K only) 73 71 64 63 BOTTOM PLATE INSULATION SHEET u163 http://www.xiaoyu163.com...
Page 7
http://www.xiaoyu163.com MECHANICAL MAIN PARTS LIST 1/1 3 7 63 1515 0 REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION 67 S0-0B6-001-390 KNOB SHAFT 1 S0-3B6-000-260 HINGE ASS’Y 68 SP-EX8-509-000 CUE,KNOB(PXE860) 2 S4-B60-002-6A0 FOOT FOR DUST COVER(PXE850) 69 S0-0F7-002-590 KNOB SET 3 S0-SL2-4F1-180...
Page 8
http://www.xiaoyu163.com COLOR NAME TABLE Basic color symbol Color Basic color symbol Color Basic color symbol Color 3 7 63 1515 0 Black Cream Orange Green Gray Blue Gold Pink Silver Titan Silver Brown Violet White Yellow L 13942296513 u163 2–11, IKENOHATA 1–CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111 Printed in Singapore 931196 http://www.xiaoyu163.com...
Need help?
Do you have a question about the PX-E860 and is the answer not in the manual?
Questions and answers
Need directions on how to reinstall the belt
To reinstall the belt on the Aiwa PX-E860 turntable, follow these steps:
1. Remove the Platter – If possible, lift the platter off the turntable to access the inner rim.
2. Place the Belt – Position the belt around the inner rim of the platter.
3. Reinstall the Platter – Put the platter back onto the turntable.
4. Align with Motor Pulley – Rotate the platter until one of the slots in the platter aligns with the motor pulley.
5. Attach the Belt – Use a straightened paperclip or a similar tool to pull the belt over the motor pulley through the slot.
6. Test the Turntable – Manually rotate the platter to ensure the belt moves smoothly, then power on the turntable to confirm proper operation.
This process ensures the belt is correctly installed and functioning.
This answer is automatically generated
Is the Aiwa PX-E860 and PX-E 850 same service manual