Speaker Installation Option - Panasonic SC-XH155 Operating Instructions Manual

Speaker installation option

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
‰
4.0 mm
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the hole(s).
DO NOT
≥ In this position, the speaker will
likely fall if moved to the left or
right.
∫ Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥ Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
Surround speaker
A 17.6 mm
B 98.7 mm
C 40 mm
D 40 mm
20
20
At least 30 mm
‰
7.0 mm to
3 mm to 5 mm
e.g., Surround speaker
DO
≥ Move the speaker so that the
screw is in this position.
Center speaker
E 16.7 mm
F 63.7 mm
G 23 mm
H 96 mm
I 26 mm
Front speaker
Attach to a wall without the base and the stand
‰
9.4 mm
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
Reattaching the speaker cable
Insert the cable
from the bottom.
J 64.5 mm
K 348.5 mm
L 109.5 mm
M 50.3 mm
N 50.3 mm
Screw eye
String (not supplied)
(not supplied)
Less than
Wall
10 cm
Pull out the cable
through the hole.
Leave about
120 mm.