Sony UVW-1800 Operating Instructions Manual page 67

Time counter display
One of the four indications appears. Use the
displayed.
Initially, only the trip value appears. Press the
total to the right of the slash, as long as the button is held down.
Ending the digital hours meter display
Press the HOURS METER button.
Resetting the trip values
Consult your Sony service representative.
Clean both the video and audio heads using the special BCT-5CLN cleaning
cassette. Follow the instructions for the cleaning cassette carefully, as improper
use can damage the heads.
Cleaning procedure
Insert the cleaning cassette, hold down the PLAY button and press the EJECT
button. This carries out a five-second cleaning operation. The EJECT indicator
flashes during this period, and all tape transport buttons other than the EJECT
button are disabled.
• Up to three consecutive cleaning operations are possible.
Cleaning above this level may damage the heads.
• Be sure the unit is not left with the cleaning cassette in place, as this can cause
damage to the heads.
and buttons to change the item
button to display the cumulative
Digital hours meter
Chapter 8 Maintenance 8-5 (E)