Sony UVW-1800 Operating Instructions Manual page 23

1 Insert a cassette.
The STOP button lights, then a few seconds later the tape is ready to start
running. At this point a still picture appears on the monitor.
Always be sure to use a metal tape.
2 Press the PLAY button.
Playback begins.
To stop playback
Press the STOP button.
This puts the UVW-1800/1800P into stop mode. This unit automatically enters
standby-off mode if it is left in stop mode for eight minutes.
You can change the time to switch to stand-by o f f mode in the TAPE
PROTECTION menu. For details, see under "TAPE PROTECTION" (page 7-
6 ( E ) ) .
If the tape reaches the end during playback
The tape is automatically rewound to the beginning and the unit stops.
You can disable this automatic rewind function using the menu.
For details, see "AUTO REW" (page 7-3 ( E ) ) .
Adjusting the audio playback volume
Carry this out on the monitor.
Simple search function
With the F. FWD/REW item in the AUTO EE SELECT of OPERATIONAL
FUNCTION menu set to PB, holding down the F FWD or REW button provides a
monochrome search function at 16 times normal speed in the toward or reverse
direction respectively. Press the PLAY button again to return to normal playback.
Operation
Chapter 4 Recording and Playback 4-3 (E)