Sony UVW-1800 Operating Instructions Manual page 25

Switch and control settings
After completing the connections, make the switch and control settings as follows.
I Power on the video monitor.
2 Set the input selector of the monitor to the input connector connected to the
UVW-1800/1800P.
3 Following the instructions in the appropriate operation manual, and prepare the
player for playback.
4 Power on the UVW-1800/1800P.
5 Set the VIDEO IN selector switch to Y-RJB.
6 Set the time counter display selector switch according to the time data to be
used.
7 Adjust the AUDIO INPUT LEVEL controls so that the audio level meters
indicate around 0 VU when the audio signal is at its maximum.
Switch and control settings
Chapter 4 Recording and Playback 4-5 (E)