Cassettes
Ejecting the cassette
3-4 (E)
Chapter 3 Preparations
Removing slack in the tape
Carefully retote one of the reels with your finger in the direction of the arrows until
it stops.
No double insertion of cassettes
When you insert a cassette, the orange lock-out plate appears in the cassette
compartment to prevent double insertion.
Press the EJECT button.
The tape is wound back into the cassette (this takes several seconds), and then the
cassette is ejected from the unit.
If the time counter display is showing CTL values, it is reset.
To protect recorded material which you wish to keep, press in the record-inhibit
plug on the cassette.
When you insert a cassette with the record-inhibit plug pushed in into the cassette
compartment, the REC INHIBIT indicator lights, and it is not possible to record.
To re-record on the cassette, return the record-inhibit plug to its original position.
Removing slack in the tape
Record-inhibit plug