Samsung WF8604 User Manual page 19

Front-loading washing machine
Hide thumbs Also See for WF8604:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

SPIN SELECTION
6
BUTTON
WASH OPTION
7
SELECTION BUTTON
EASY IRON
8
SELECTION BUTTON
START/PAUSE
9
SELECTION BUTTON
POWER BUTTON
10
WF8604NG-02607H_EN.indd 19
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
WF8604
All Lamps Turn Off,
WF8602
All Lamps Turn Off,
WF8502
WF8600
All Lamps Turn Off,
WF8500
WF8608
All Lamps Turn Off,
WF8508
"No spin
" - The laundry remains in the drum and no spin cycle is
performed after the final drain.
"Rinse Hold (All Lamps Turn Off)" -The laundry remains soaking in the
final rinse water. Before the laundry can be unloaded, either a Drain or
Spin cycle must be performed.
Press this button repeatedly to cycle through the wash options:
Soak
 Rinse+
 Intensive
Soak
+ Intensive
 Rinse+
Rinse+
+ Intensive
 off
"Intensive
": Press this button when the laundry is heavily soiled and
needs to be washed intensively. The cycle time is increased for each
cycle.
"Rinse+
": Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.
"Soak
": Use this option to effectively remove stains from your
laundry by soaking your laundry.
The Soak function is performed 13 minutes into the wash cycle.
The Soak function continues for 30 minutes with six cycles, where
one cycle is a soak cycle that spins for 1 minute and stands still for 4
minutes.
The Soak function is only available for the following wash programs:
Cotton( ), Synthetics( ), Baby care( ), Daily wash( ).
Press this button to prepare your laundry so that it can be easily ironed
by reducing the wrinkles during the spin cycle.
Easy Iron is only available for the following wash programs:
Cotton( ), Synthetics( ), Daily wash( ).
When Easy Iron is selected, you can set the spin cycle speed up to
800 rpm. (If you select Easy Iron with a spin cycle speed set to higher
than 800 rpm, the spinning speed is automatically changed to 800
rpm.)
Press to pause and restart a cycle.
Press it once to turn your washing machine on, press it again to turn
your washing machine off.
If the washing machine is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
, 400, 800, 1400 rpm
, 400, 800, 1200 rpm
, 400, 800, 1000 rpm
, 400, 800, 800+ rpm
 Soak
+ Rinse+
+ Intensive
 Soak
+
washing a load of laundry _19
2009-02-24 ¿ÀÀü 11:01:20

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents