Table of Contents
Advertisement
Accessories
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
User & Installation manual(1)
Insulation pipe A(2)
Clamp hose(2)
Selecting the installation location
Indoor unit
f There must be no obstacles near the air inlet and outlet.
f Install the indoor unit on a ceiling that can support its weight.
f Maintain sufficient clearance around the indoor unit.
f Make sure that the water dripping from the drain hose runs away correctly and safely.
f The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users.)
f After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10 or thicker
insulation. Otherwise, there can be air leak or dew from the connection part.
f Rigid wall without vibration.
f Where it is not exposed to direct sunshine.
f Where the air filter can be removed and cleaned easily.
Space requirements for installation & service
f Construction standard for inspection hole.
1) In case, the ceiling is textile, inspection hole dose not need.
2) In case, the ceiling is plaster board, inspection hole depends on inside height of the ceiling.
a. Height is more than 1m : Only "B" [Inspection for PBA] is applied.
b. Height is less than 1m : Both "A" & "B" are applied.
c. "A" & "B" are inspection holes.
16
Pattern sheet(1)
Insulation pipe B(1)
Washer(8)
Insulation A(2)
Cable tie(4)
Grommet hanger(4)
Insulation B(1)
Flexible hose(1)
Wired remote controller(1)
Hide quick links:
Advertisement
Table of Contents
