Changing The Preset Station Table - Samsung SV-640X Instruction Manual

Changing the Preset Station Table

You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
1 Press the MENU button on the remote control.
Result:
INSTALL
PROG OPTIONS INSTALL
2
Press the corresponding
INSTALLATION
CLOCK BONUS LANG
INSTALLATION
3
Press the OK button to select this option.
Result:
➛❿!!
OK END: MENU
" ❷!!
4 Press the corresponding
UP option is selected.
And then press the ❿ button to select this option.
Result:
INSTALL
AUTO SET UP
5 Press the corresponding
MANUAL SET UP
VCR OUTPUT CH :CH36
TV programme is selected.
Result:
6
To change the programme number assigned to a station press the
❿ END: MENU
" ❷
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the
** TV STATION TABLE **
press OK again to swap the position.
PR CH NAME
1 002 CAEB
8
You can modify this station by repeating the same procedure from
2 --- ----
Step 5 onwards.
3 --- ----
4 --- ----
9
On completion, press the MENU button three times to exit the
5 --- ----
menu.
" ❷ SWAPPING:OK
MENU
** TV STATION TABLE **
PR CH NAME
1 --- ----
2 --- ----
3 002 CAEB
4 --- ----
5 --- ----
SWAPPING:OK
" ❷
MENU
20
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
" ❷
option.
The INSTALLATION menu is displayed.
or buttons, until the
MANUAL SET
" ❷
The TV STATION TABLE menu is displayed.
or buttons, until the required preset
" ❷
The selected station is displayed at the same time on
the television screen.
or buttons to select required position. And then
" ❷
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷!
USER SET option.
3
Press the OK button to select this option.
4
Press the corresponding or buttons, until the
" ❷
SELECT option is selected.
5 Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press MENU twice to exit the menu.
Selecting the Recording Speed
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
(SV-640X)
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
❿
END: MENU
" ❷
TAPE
(SV-445X/SV-245X/SV-240X)
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
❿ END: MENU
" ❷
(SV-640X/SV-445X Only)
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
SPEED DUB TV/VCR TIMER
21
GB