Changing The Preset Station Table; Switching Between The Tv And Vcr Modes - Samsung SV-H620K Instruction Manual

01823S SV-H620K/DIN-GB2 3/21/03 4:51 PM

Changing the Preset Station Table

You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
GB TV SYSTEM :K
VCR OUTPUT CH :CH36
❿
END: MENU
œ ❷
** TV STATION TABLE **
PR CH NAME DEC
1 002 CAEB OFF
2 --- ---- OFF
3 --- ---- OFF
4 --- ---- OFF
5 --- ---- OFF
œ ❷ SWAPPING:OK
MENU
** TV STATION TABLE **
PR CH NAME DEC
1 --- ---- OFF
2 --- ---- OFF
3 002 CAEB OFF
4 --- ---- OFF
5 --- ---- OFF
SWAPPING:OK
œ ❷
MENU
22
Page 22
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding œ , ❷¤
INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the
œ ❷ MANUAL SET
UP option is selected.
And then press the ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
5
Press the corresponding œ or ❷ buttons, until the required preset
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
6
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the or buttons to select required position. And then
œ ❷
press OK again to swap the position.
8 You can modify this station by repeating the same procedure from
Step 5 onwards.
9
On completion, press the MENU button three times to exit the
menu.

Switching between the TV and VCR Modes

The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
When the VCR indicator is... Your television...
On The television receives the picture from
the VCR and you can select channels
with the PROG/TRK (œ or ❷) / PROG
(œ or ❷) buttons on the VCR or the
remote control.
Off (or the VCR is turned off) The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the programme (œ or
❷) buttons on your television to select
the channels.
To switch the VCR indicator on and off, simply press the TV/VCR button.
SPEED DUB TV/VCR TIMER
GB
23