Error Beep Off - Sharp FO-3150 Operation Manual

Volume Adjustment
Ringer
1
Press
volume level.
(Make sure that
pressed and a document is not loaded
in the feeder.)
•
The ringer will ring once at the selected
level.
2
If you selected RINGER: OFF OK ? to turn off the ringer, press

Error beep off

The machine normally sounds three beeps to alert you if an error occurs
during transmisson, reception, or copying. The machine also sounds a
double-beep if you press an invalid key on the operation panel. If you wish to
turn off the error beep, follow the steps below.
FUNKTION
1
Press
2
Press
3
Press
4
Press
1
to turn off the error beep.
2
STOP
5
Press
26
or to select the desired
SPEAKER
has not been
once and 3 times.
once and 3 times.
once.
to turn on the error beep or
to return to the date and time display.
Display:
RINGER: HIGH
RINGER: MIDDLE
RINGER: LOW
RINGER: OFF OK ?
START
Display:
OPTION SETTING
ERROR BEEP
1=YES, 2=NO
The display briefly shows
your selection, then:
END BEEP
.