Direct Button Operation; Changing Volume; Mute; Sleep Timer - Sharp LB-1085 Operation Manual

Direct Button Operation

18

Changing Volume

You can change the volume by pressing VOL
on the LCD Monitor or on the remote control unit.
• To increase the volume, press
• To decrease the volume, press
20
Audio status
Output device
Fixed
Speaker Variable sound
• When "Output Select" is set to "Variable", the indicator
on the screen changes as shown below.
60
• See page 27 for details on the Output Select function.

MUTE

Mutes the current sound output.
Press MUTE.
• " " will be displayed on the screen for 30 minutes,
and the sound is silenced.
• Within 30 minutes of pressing
canceled by using one of the methods below.
- Mute will be canceled if you press VOL
MUTE.
• Mute will be canceled after 30 minutes have
passed. However, the LCD Monitor will not suddenly
output a loud sound as the volume level is set to 0
automatically.

Sleep Timer

Allows you to set a time when the LCD Monitor
automatically switches to standby.
Press SLEEP.
• The remaining time displays when the sleep timer has
been set.
• Each time you press SLEEP, the remaining time
switches as shown below.
Off 30 60 90 120
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press
SLEEP twice then change the time setting.
• Five minutes before the time expires, the remaining
time displays every minute.
• Select "Off" by pressing SLEEP to cancel the sleep
timer.
• The LCD Monitor will enter standby when the
remaining time reaches zero.
• When the sleep timer is set, its indicator on the LCD
Monitor lights red.
/
VOL
.
VOL .
Output Select
Variable
Mute
MUTE, mute can be
/ or