Table of Contents
Advertisement
Battery
Speed
Torque Settings
Chuck
Drill Weight
Length
Included Bits
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAuTIONS
1.
KEEP WORK AREA CLEAN AND DRY.
ries.
2.
KEEP CHILDREN AWAY FROM WORK AREA.
product.
3.
STORE IDLE EQuIPMENT.
dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of
children.
4.
DO NOT uSE THIS PRODuCT IF uNDER THE INFLuENCE OF ALCOHOL OR
DRuGS. Read warning labels on prescriptions to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not attempt to use this tool.
5.
uSE EYE, HEARING, AND BREATHING PROTECTION.
impact eye glasses, hearing protection, and dust mask/respirator when working with this
product.
6.
DRESS SAFELY.
this product. Do not wear loose clothing or jewelry as they can become caught in moving
parts. Wear a protective hair covering to prevent long hair from becoming caught in mov-
ing parts. If wearing a long-sleeve shirt, roll sleeves up above elbows.
7.
INDuSTRIAL APPLICATIONS MuST FOLLOW OSHA REQuIREMENTS.
DO NOT OVERREACH.
8.
falling, back injury, etcetera.
9.
STAY ALERT.
this tool when you are tired or distracted from the job at hand.
SKU 44849
SPECIFICATIONS
18V, Ni-Cd Rechargeable
0-900 RPM, Reversible
6
3/8" Keyless
4.3 lb.
9"
6 Pc. Screw. Set; 6 Pc. Drill Set; Magnetic Extension Bit
SAVE THIS MANuAL
When not in use, tools and equipment should be stored in a
Nonskid footwear or safety shoes should be used when working with
Keep proper footing and balance at all times to prevent tripping,
Watch what you are doing at all times. Use common sense. Do not use
For technical questions, please call 1-800-444-3353.
Cluttered, damp or wet work areas invite inju-
Do not allow children to handle this
Wear ANSI-approved safety
REV 03a, 08a
Page 2
Hide quick links:
Advertisement
Table of Contents
