Operation; Starting And Stopping - Central Machinery 95346 Assembly And Operation Instructions Manual

1. WARNING! Always wear safety equipment. When operating the Auger Drill,
wear ANSI-approved safety impact eye goggles, hearing protection, heavy duty
work gloves, sturdy work boots, and head protection.
2. Place the Auger Drill on its side with its Auger (33a) resting upon the ground surface
location that is to be drilled. Make sure that no debris, clothing, or other objects
are near the auger bit. Keep all bystanders away.
PRIMER (95)
3. Depress the Primer (95) three to four times. (See figure c.)
4. Set the Choke (76)
closed if the Engine is cold.
Open if the Engine is warm.
5. Grip the Frame (1b) firmly with your left hand. Keep all body parts well away from
the bit. Then, with your right hand, pull rapidly on the Starter Handle (7) to start
the Engine. (See figure c.)
SKU 95346 for technical questions, please call 1-800-444-3353

OPERAtION

Starting and Stopping

cHOKE (76)
fIGURE c
(See figure c.) to the appropriate position:
fRAME (1b)
StARtER
HANDLE
(7)
PAGE 9