Specifications Table; General Safety Warnings And Precautions - Central Machinery 47158 Assembly And Operating Instructions Manual

Electrical Requirements
 Speed Ranges
Maximum Chuck Capacity 5/64" Drill Bit / 5/64" End Mill / 3/4" Face Mill
Maximum X Travel
Maximum Y Travel
Maximum Z Travel
X, Y, Z Graduations
Table Size
Table Slot
Throat Depth
Swing Diameter
Base Size
Spindle Stroke
Spindle Taper
Weight
You will need this manual for the safety warnings and precautions, assembly, op-
erating, inspection, maintenance and cleaning procedures, parts list and
assembly diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep this manual and invoice in a safe
and dry place for future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
.
this product.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
3.
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
4.
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
For technical questions, please call 1-800-444-3353.
SKU 47158

SPECIFICATIONS TABLE

10 V / 6 0 Hz / 1/5 HP
High: 100-,000 RPM / Low: 100-1,000 RPM
9"
4"
8-1/"
.001" / Line
9-3/8" x 5-3/8"
5/16" x 5/8"
5-1/"
11"
10-1/8" x 9-3/8"
1-3/16"
MT
103 Pounds
SAVE THIS MANUAL
Page