Specifications; Safety Warnings And Precautions - Central Machinery 44991 Assembly And Operating Instructions Manual

Power Consumption
Motor
Speed Ranges
Spindle
Chuck
End Mill Capacity
Face Mill Capacity
Drill Capacity
Micro Feed Scale
Depth Scale
Table Slot Width
Table Size
Unit Height
Weight
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
SKU 44991

Specifications

ITEM
120 VAC, 60 Hz, single phase
4/5 HP
0 ~ 1100 low RPM and 0 ~ 2500 high RPM
R-8 Taper
JT33 Taper; 7/64 to 1/2 inch capacity
1/2 inch
1 inch
1/2 inch
0.002 inch per line
0 to 12 inches in 1/16 inch increments
1/2 inch
15-7/8 (L) x 3-11/16 (W) inches
33-11/16 inches
115 lbs.
Save This Manual

Safety Warnings and Precautions

Page 2
DESCRIPTION