Table of Contents
Advertisement
User' s Manual
Recording Video
Once you have installed the DVR following the instructions in Chapter 2 — Installation, it is
ready to record. Unless you change the setup, the DVR will start recording and will continue
recording until the hard disk drive is full.
Although you will be able to record without changing the unit from its original factory settings,
you will want to take advantages of the DVR's many tools. See Chapter 3 — Configuration for
detailed descriptions of the recording mode options.
Recording Audio
If the DVR was set up to record audio, it will record audio when video is recording.
NOTE: Make certain you comply with all local and federal laws and regulations when
recording audio.
Playing Recorded Video
Once video has been recorded, you can view it by pressing the
playing video for the first time, the DVR will display the most recent image. When playing
video subsequent times, the DVR will start playing video from the last recalled image.
NOTE: Only the administrator level user can view the covert cameras. The covert
cameras in the playback mode are determined by the current camera setting.
Pressing the
PLAY/PAUSE
RW (Rewind) Button
Pressing the
RW
button plays video backward at high speed. Pressing the button again toggles
the playback speed from
respectively.
Entering Fast Backward Playback mode from Live Monitoring mode can be password
protected.
FF (Fast Forward) Button
Pressing the
button plays video forward at high speed. Pressing the button again toggles the
FF
playback speed from
Entering Fast Playback mode from Live Monitoring mode can be password protected.
70
button again will freeze the video on the screen.
,
and
,
and
. The screen displays
PLAY/PAUSE
. The screen displays
button. When
,
and
,
and
respectively.
Advertisement
Table of Contents
