Table of Contents
Advertisement
User' s Manual
Highlight the box beside Panic Recording Speed and press the
button. A drop-down list
of panic recording speeds appears. You can select from 1 image per 10 seconds to 60 images
per second for NTSC (to 50 images per second PAL).
NOTE: If you have set the Record Resolution for High, you will not be able to select 60
ips NTSC (50 ips PAL).
Highlight the box beside Panic Recording Quality and press the
button. A drop-down list
appears. You can select from Very High, High, Standard and Low image quality that recorded
at panic recording mode.
Highlight the first box beside Auto Deletion. Pressing the
button toggles between On and
Off. When set to On, the DVR will delete video recorded earlier than user-defined period.
Highlight the second box beside Auto Deletion, and press the
button to select the length of
time recorded data will be kept from 1 to 99 Days.
You can save your changes by highlighting OK and pressing the
button . Selecting Cancel
exits the screen without saving the changes.
Time-Lapse Record Mode Setup Screen
Figure 45 — Time-Lapse Record Setup screen.
Highlight the box under the Speed heading and press the
button. A drop-down list of record
speeds appears. You can select from 1 image per 10 seconds to 60 images per second for NTSC
(to 50 images per second PAL).
NOTE: If you have set the Record Resolution for High, you will not be able to select 60
ips NTSC (50 ips PAL).
38
Advertisement
Table of Contents
