System Setup; Preparation; Image Setting - Polaroid TFT-LCD TV User Manual

System Setup

Preparation

1. After connection, press the POWER button to turn on the unit.
2. Press the SOURCE button to select TV mode and follow the procedures below.

Image Setting

Note: This item is only available when there is signal input.
Press the MENU button once to enter the setup
menu, as shown on the right:
In the setup menu, press the ▲▼ button to select
Image and then press the ENTER button to enter
the item. Press the ▲▼ button to select. Press
the MENU button to return to the previous menu.
Scheme Setup
Press the ▲▼ button to select Scheme and
press the ENTER button to enter. Press the
▲▼button to select the desired item and press
the ENTER button to confirm your selection.
Press the MENU button to return to the previous
menu.
- 16 -