Polaroid Digital HD-Ready LCD TV User Manual page 18

Installing the LCD TV
Use a supplied antenna cable to connect the TV signal to the LCD TV's TV CABLE
terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet. Turn ON the POWER SWITCH on the side of the TV.
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the power outlet when the LCD TV will
not be used for a long period of time.
The POWER button on the front panel is only used for switching the LCD TV
into standby, it does not disconnect the device from the main voltage. To
completely disconnect the main voltage, please remove the power plug from
the socket or turn off the AC POWER SWTICH.
Press the INPUT button on the remote to display the Source List. Use the ▲▼ buttons to
select DTV/TV, and press the OK button.
VHF/UHF IN
16