Restoring The Default Settings; Dialing Mode; Flash Duration; Reset - Gigaset A180 User Manual

Restoring the default settings

Settings for connecting the base
station to the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide of your PABX.
Changing the dialing mode
The following dialing modes can be
selected:
u
Tone dialing (DTMF)
u
Pulse dialing (DP)
¢ ¢
Settings
§Menu§
¢

Dialing Mode

Tone / Pulse
Select a dialing mode and
press
§OK§
Setting the flash time
¢ ¢
Settings
§Menu§
¢

Flash Duration

Short / Long
Select a flash time
(Short = 80 ms,
ms) and press
Switching temporarily to
tone dialing (DTMF)
If your PABX still operates with pulse dial-
ing (DP), but you need tone dialing
(DTMF) for a connection (for example to
listen to the voice mailbox), you must
switch to tone dialing for the call.
Requirement: You are conducting a call
or have already dialed an external
number.
¢
Bild 1 Tone Dialing
§Menu§
Press display key to confirm.
§OK§
Tone dialing is now activated for this call
only.
28
System
.
System
= 650
Long
.
§OK§
Restoring the default
settings
You can restore the default values for
most settings. When resetting, all hand-
sets remain registered and the directory
will not be deleted.
¤
Carry out the following on a registered
Gigaset A18H handset!
¢ ¢
Settings
§Menu§
Press the display key to con-
§OK§
firm reset.
¢
System

Reset