The Start Screen - Gigaset SX553 WLAN dsl First Steps

The user interface
Traffic Control
You will find information about the currently used and available time and data volume
for your Internet connection by clicking Traffic Control. To do this, you must first con-
figure the time and volume control. This is described on page 60.
ì
Click OK.
A screen appears with security information; you can skip this for the initial configura-
tion. If you carry out all the general and security settings using the wizard as described
below, your device and network will be fully protected. If not, the next time you log on
you will be informed of security gaps in the configuration program.
ì
Click OK.
You will now see the start screen.

The start screen

The start screen is the starting point for all configuration and administration proce-
dures.
Start screen functions
On the start screen you can
u
select the language for the user interface (see page 32),
u
view the status of the Internet connection or establish or end an Internet connection
(page 33); depending on the selected connection mode, the start screen shows the
status and also the Connect or Disconnect button,
u
open the Status menu to obtain status information about the
Gigaset SX553 WLAN dsl (see page 117),
u
call up the Basic Setup Wizard for the basic configuration (see page 35)
u
call up the Security Setup Wizard (see page 42),
u
open the Advanced Settings menu for additional configuration options
(see page 52).
30