Checking The Operating State - Gigaset SX553 WLAN dsl First Steps

First steps

Checking the operating state

Your Gigaset SX553 WLAN dsl is now ready for use. The LED displays on the top panel
of the Gigaset SX553 WLAN dsl provide information about the operating state:
The LEDs (from right to left) have the following functions:
LED State
On
Power
Off
On
ADSL Flashing
Off
On
Online
Off
On
USB
Off
On
Phone
Flashing
Line
Off
On
LAN1 –
Flashing
LAN4
Off
On
Flashing
WLAN
Off
On
VoIP
Flashing
Off
On
Flashing
Phone 1/
Phone 2
Off
26
Status
The Gigaset SX553 WLAN dsl is on.
The Gigaset SX553 WLAN dsl is off.
The DSL line is connected and the DSL port is ready for
use.
The DSL line is being synchronised.
The DSL line is not connected or the interface is not syn-
chronised.
Connection to the Internet has been established.
There is no Internet connection.
A device is connected to the Gigaset SX553 WLAN dsl via
the USB port.
There is no device connected.
One of the connected phones' receivers has been lifted for
a call (fixed network telephony).
The phone is ringing and a fixed network call is being
received or someone is waiting on the line.
There is currently no fixed network connection.
A device is connected to the relevant LAN port.
The LAN port is sending or receiving data (traffic).
There is no device connected.
The radio interface is active.
The Gigaset SX553 WLAN dsl is sending or receiving data
on the radio interface.
The radio interface has been deactivated or no radio sig-
nal is being received.
One of the connected phones' receivers has been lifted for
a call (Internet telephony).
A call is currently being made via the Internet.
There is currently no connection for Internet telephony.
The relevant phone's receiver has been lifted for a call.
The phone is ringing and a call is being received or some-
one is waiting on the line.
The receiver is down. No call or phone conversation at
present.