Control Menu - Martin MAC 250 ENTOUR User Manual

C
ONTROL MENU
Options displayed in bold represent the default settings.
Note that lowercase letters in the control panel display are being phased out. Capital letters only are used
from software v. 2.0.
Menu Item
  - 




 


 









 
Options
DMX address (default DMX address = 1)
16 Bit
16 Bit extended
Map DMX pan control to tilt channel and vice versa.

Normal pan and tilt control

Reverse DMX pan control, right → left

Normal pan control, left → right

Reverse DMX tilt control, down → up

Normal tilt control, up → down

Default pan/tilt speed
Maximum pan/tilt speed
Minimum pan/tilt speed
Display remains on

 Display extinguishes 2 minutes after last key press
Display extinguishes 10 minutes after last key press

Automatic display dimming

Set display intensity manually
 
-
Enable DMX lamp off command

Disable DMX lamp off command

Enable DMX reset command

Disable DMX reset command

Reset from Controller

Lamp strikes automatically within 90 seconds of power on

No automatic lamp strike

Lamp strikes if DMX is present, douses after 15 mins. if no

DMX signal received
Effect wheels turn shortest distance

Effect wheels do not cross open position

Linear dimming curve

Tungsten dimming characteristics

Return all personality settings (not calibrations) to factory

defaults

Control menu

Notes (Default settings in bold print)
41