TG5583.book Page 65 Friday, April 8, 2005 6:33 PM
Caller's recording time
You can change the maximum message
recording time allotted to each caller.
"1min", "2min", or "3min": Caller
messages are limited to 1 minute to 3
minutes.
"Greeting only": The unit plays the
greeting message but does not record
caller messages.
1
Press {MENU} (middle soft key).
2
Scroll to J, then press {SELECT}.
3
Scroll to "Recording time" then
press {SELECT}.
4
Press {V} or {^} repeatedly to select
the desired setting.
5
Press {SAVE}, then press {OFF}.
Message alert
You can select whether or not the
message indicator on the handset will
flash when new messages have been
recorded (page 59).
1
Press {MENU} (middle soft key).
2
Scroll to J, then press {SELECT}.
3
Scroll to "Message alert", then press
{SELECT}.
4
Press {V} or {^} repeatedly to select
"On" or "Off".
5
Press {SAVE}, then press {OFF}.
Note:
L The message indicator will not flash for
new messages while the handset is in
use.
L While message alert is on, battery
operating time will be shortened (page
14).
For assistance, please visit http://www.panasonic.com/consumersupport
Answering System Features
Turning call screening on/off
While a caller is leaving a message, you
can screen the call through the base unit
speaker.
1
Press {MENU} (middle soft key).
2
Scroll to J, then press {SELECT}.
3
Scroll to "Call screening", then
press {SELECT}.
4
Press {V} or {^} repeatedly to select
"On" or "Off".
5
Press {SAVE}, then press {OFF}.
65