Tv Aspect Settings - Panasonic Diga DMR-EX769 Operating Instructions Manual

2
STEP

Numbered
buttons
,,,
OK
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [Í] to turn the unit on.
When connecting to a television that has the VIERA Link or Q
Link functions (
You can download the tuning positions from the television for
the channels in this unit's channel coverage.
If the Country setting menu appears on the television.
Press [3, 4] to select the country and press [OK].
If the Auto setup menu appears on the television.
Press [3, 4] to select "Digital & Analogue channels" or
"Digital channels" and press [OK].
≥Digital & Analogue channels:
Perform the analogue Auto-Setup after performing the
DVB Auto Setup.
≥Digital channels:
Perform the DVB Auto Setup. (analogue Auto-Setup is not
performed)
DVB Auto Setup starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
DVB Auto Setup
Scan CH 5
CH Channel Name
ABC
1
2 ABC 2
TV : 1 Radio : 0
≥When the channel could not be received properly, adjust
the position and direction of the aerial.
3
Press [3, 4] to select "On" or "Off" when
the "Power Save" setting menu appears,
and press [OK].
Power Save
On : Minimises standby power
consumption; disables Quick
Start function and
AV2 loop-through in standby.
It will go into the Power Save mode when the unit
≥On:
is in standby condition.
It is possible to start quickly from the standby
≥Off:
mode. (Quick Start mode)
RQT9308
10
Channel reception settings and TV aspect settings
TV


VOL CH
DRIVE
SELECT
AV
PAGE
2 3
1
CH
4 5 6
CREATE CHAPTER
8 9
7
MANUAL SKIP
DELETE 0 INPUT
SELECT
SKIP
SLOW/SEARCH
STOP PAUSE PLAY/x1.3
EXIT
STATUS
OK
OPTION
RETURN
RETURN
32), downloading from the television starts.
69
Type Quality
9
TV
Data 9
Data : 1
On
Off
The features of the power save function when the unit is in
standby mode are as below.
Power Save
Power consumption
Startup time
Watching the picture
(e.g. Pay TV) from the
device connected to AV2
"FL Display" is set to "Automatic" in the Setup menu.
§1
( 52)
It is possible to startup and start recording within several
§2
seconds.
– Depending on the type of TV or the connected terminal, it
may take time to display the screen.
If the TV aspect setting screen appears on the
television.
Press [3, 4] to select the TV aspect and press [OK].
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
( 69).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
( 69).
When television picture appears, set up is complete.
To stop partway
Press [RETURN ].
∫ If the clock setting menu appears
Set the clock manually ( 54).
∫ To confirm that stations have been tuned
correctly ( 50)
∫ To restart set up ( 49)
The auto setup screens may be displayed in German, French,
Italian or Spanish. After completing step 3, change the on-
screen display to English in the following steps.
1 Press [FUNCTION MENU].
2 Press [3, 4] to select
– "Weit. Funktionen" (German)
– "Autres" (French)
– "Altre funzioni" (Italian)
– "Otras" (Spanish)
and press [OK].
3 Press [3, 4] to select
– "Setup" (German)
– "Configuration" (French)
– "Impostazioni" (Italian)
– "Configuración" (Spanish)
and press [OK].
4 Press [3, 4] to select
– "Display" (German)
– "Affichage" (French)
– "Display" (Italian)
– "Display" (Spanish)
and press [1].
5 Press [3, 4] to select
– "Sprachauswahl" (German)
– "Langue" (French)
– "Lingua" (Italian)
– "Idioma" (Spanish)
and press [OK].
6 Press [3, 4] to select "English" and press [OK].
7 Press [EXIT].
On Off
§1
Approx. 0.9 W Approx. 13 W
Not Quick Quick
§2
Cannot do Can do