Step 2 Channel Reception Settings And Tv Aspect Settings - Panasonic Diga DMR-EX88 Operating Instructions Manual

2
STEP
¦ DVD
Numbered
buttons
,,,
OK
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [Í DVD] to turn the unit on.
[For]France,[Italy,[Spain[and[Switzerland]
≥Country setting screen appears on the television.
Country
France
España
Italia
Schweiz
Suisse
Svizzera
SELECT
OK
RETURN
RETURN: leave
Press [3, 4] to select the country and press [OK].
[For]Germany[
Only the Auto setup screens are displayed in German in the
operating instructions. After completing step 5, change the
on-screen display to English in the following steps.
1 Press [FUNCTION MENU].
2 Press [3, 4] to select "Weit. Funktionen" and press [OK].
3 Press [3, 4] to select "Setup" and press [OK].
4 Press [3, 4] to select "Display" and press [1].
5 Press [3, 4] to select "Sprachauswahl" and press [OK].
6 Press [3, 4] to select "English" and press [OK].
7 Press [EXIT].
≥DVB Auto-Setup starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
DVB Auto-Setup
Bitte warten! Kan 5
Prog. Kanal Sender Name
1 352 ABC
2 354 ABC 2
RETURN: Abbrechen
RETURN
When DVB Auto-Setup is completed, analogue Auto-Setup
starts. This takes about 8 minutes.
Sendersuchlauf
Kan
Suche analoge Sender, bitte warten.
RETURN: Abbrechen
RQT9079
RETURN
10
Channel reception settings and TV aspect settings
DVD
TV
¦
¦
VOL
CH
DRIVE
SELECT
AV
PAGE
2 3
1
CH
4 5 6
ShowView
7 8 9
PROG/CHECK
DELETE 0 INPUT
SELECT
SKIP
SLOW/SEARCH
PAUSE PLAY/x1.3
STOP
STATUS EXIT
EXIT
FUNCTION MENU
OK
OPTION
RETURN
RETURN
CREATE
MANUAL SKIP
CHAPTER
OK: access
69
Net ID TS ID Qualität
12302 82041 9
12302 82041 9
4
≥When the channel could not be received properly, adjust
the position and direction of the aerial.
[For]Germany[ When using an indoor antenna,
– make sure that there is nothing causing interference.
– switch "Active Antenna" to "On" in the Setup menu (➡ 66)
if the antenna is not equipped with power supply.
Then repeat the Auto-Setup.
After analogue Auto-Setup is complete, TV aspect setting
screen appears.
≥If you selected "Schweiz", "Suisse" or "Svizzera" in the
Country setting, the "Power Save" setting menu appears
after analogue Auto-Setup is complete. Select "On" or "Off"
(➡ 66).
Then TV aspect setting screen appears.
TV Bildschirmformat
16:9-Breitbild-TV
16:9
4:3-TV
Pan & Scan
Letterbox
SELECT
OK
RETURN
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(➡ 84).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(➡ 84).
3
Press [3, 4] to select the TV aspect
and press [OK].
When television picture appears, set up is complete.
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system ➡ 19)
4
Press [2, 1] to select "Ja" and press
[OK].
Postleitzahl
Gewähltes Land : XXXXXX
Dieses Gerät aktualisiert die
GUIDE Plus+ Daten
mehrmals pro Tag.
CHANGE
Nummer
OK
LL
0
RETURN
5
Press the numbered buttons or
[3, 4, 2, 1] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about 30
minutes.
6
When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN].
∫ If the clock setting menu appears
Set the clock manually (➡ 66).
∫ To confirm that stations have been tuned
correctly (➡ 62)
∫ To restart set up (➡ 61)
[Note]
≥When this unit is not operated for approximately 5 minutes while
the screen is being displayed, the screen saver is displayed. To
return to the previous screen, press [OK].
9