Changing The Unit's Settings; Common Procedures; Tuning - Panasonic Diga DMR-EX769 Operating Instructions Manual

Changing the unit's settings

You can change the unit's settings using Setup menu.
≥The settings remain intact even if you switch the unit to standby.

Common procedures

1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "Others" and
press [OK].
3
Press [3, 4] to select "Setup" and
press [OK].
Menus
Tabs
Setup
Remote Control
Clock
Setting for Standby

Tuning

DivX Registration
Disc
System Update
Picture
Initialize
Sound
Display
Connection
Others
4
Press [3, 4] to select the tab and
press [1].
5
Press [3, 4] to select the menu and
press [OK].
6
Press [3, 4] to select the option and
press [OK].
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
Tuning
∫ Favourites Edit
You can create four Favourites of channels for making viewing and
recording easier. Editing these Favourites does not affect the
channel setting itself.
≥Timer recording may not work correctly if you edit the Favourite
during timer recording standby.
Press the "Green" button to
select the Favourite.
To add channels to a Favourite
1 Press [3, 4] to select the channel in the "All Channels" column
and press the "Yellow" button.
≥Repeat this step to add other channels.
≥Press the "Blue" button to add all the available channels to the
Favourite. (This function is available only when no channels
have been added to the Favourite.)
2 Press [OK] to save the Favourite.
To change the order of channels of a Favourite
1 Press [1] .
§
2 Press [3, 4] to select the channel in the "Favourite" column to
move and press the "Green" button.
3 Press [3, 4] to select the new position of the channel and press
the "Green" button.
≥Repeat the steps 2 – 3 to move other channels.
4 Press [OK] to save the Favourite.
To delete channels on a Favourite
1 Press [1] .
§
2 Press [3, 4] to select the channel in the "Favourite" column and
press the "Yellow" button.
≥Repeat this step to delete other channels.
≥Press the "Blue" button to delete all the channels from the
Favourite.
Options
DVD 1
TAB
SELECT
RETURN
OK
Favourites Editor
All Channels Favourite 1
2 ABC
20 ABC HDTV
Favourite Select Add Add All
SELECT
RETURN
3 Press [OK] to save the Favourite.
Deleting a channel from a Favourite does not affect the channel
itself. You can still select the channel from the "All Channels"
category.
To change the name of a Favourite in the "Favourite"
column
1 Press [1] .
§
2 Press the "Red" button.
( 38, Entering text)
When the station name of the "All Channels" column is highlighted
§
∫ Auto-Setup Restart
Download from TV
You can restart auto channel setting if set up (
reason.
Select "Download from TV" when you connect the unit to a Q Link
compatible TV with a fully wired 21-pin Scart cable or a VIERA Link
(HDAVI Control 3 or later) compatible TV with an HDMI cable.
When the confirmation screen appears
Press [2, 1] to select "Yes" and press [OK].
You can also use the following method to restart Auto Setup.
When the unit is on and stopped
Press and hold [X CH] and [CH W] on the main unit until the
Country setting screen appears.
All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
∫ Settings for Digital Channels
Press [OK] to show the following settings.
DVB Manual Tuning
You can set channels manually that the Auto-Setup Restart could
not complete successfully.
1 Press [3, 4] to select "DVB Manual Tuning" and press [OK].
DVB Manual Tuning
Channel System
Western Europe (CCIR)
Frequency
[CH24] 498,0
Signal Quality 0
Signal Strength 0
Channel Name Type New
No.
TV : 0 Radio : 0 Data : 0
START SCAN
OFFSET
Change Channel System
RETURN
CH
2 Press [3, 4] to select the channel you want to set.
3 Press [2, 1] to adjust the frequency.
≥The frequency rises and falls in steps of 0.5 MHz.
≥Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to "Signal Condition" (
strength.]
4 Press [OK] to start scan.
The set channel is displayed in the table.
5 Press [EXIT] and press [W X CH] to check that applicable
channels have been selected.
Add New DVB Channels
You can search for newly added terrestrial digital channels to
receive.
1 Press [3, 4] to select "Add New DVB Channels" and press [OK].
The unit starts searching for
newly available terrestrial
digital channels. This takes
about 5 minutes.
A message is displayed
when the search is finished.
"No new DVB channels found." is displayed when no new
channels can be found.
2 Press [OK] to save the newly found channels.
10) fails for some
MHz
10
10
If there is no picture, press
the "Red" button and select
the correct channel system.
50) for signal quality and signal
Add New DVB Channels
Scan CH 5 69
CH Channel Name Type Quality
RQT9308
49