Step 2 Channel Reception Settings And Tv Aspect Settings - Panasonic Diga DMR-EX79 Operating Instructions Manual

STEP

Numbered
buttons
,,,
OK
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [Í] to turn the unit on.
[For]Germany[and]Austria[
The "Active Antenna" setting menu appears.
Press [3, 4] to select "On" or "Off" and press [OK].
When using indoor antenna that is not equipped with power
supply, select "On".
When connecting to a television that has the VIERA Link or Q
Link functions (
You can download the tuning positions from the television for
the channels in this unit's channel coverage.
[For]France,[Italy,[Spain[and[Switzerland]
If the Country setting menu appears on the television.
Press [3, 4] to select the country and press [OK].
If the Auto setup menu appears on the television.
Press [3, 4] to select "Digital & Analogue channels" or
"Digital channels" and press [OK].
≥Digital & Analogue channels:
Perform the analogue Auto-Setup after performing the
DVB Auto Setup.
≥Digital channels:
Perform the DVB Auto Setup. (analogue Auto-Setup is not
performed)
DVB Auto Setup starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
Scan
CH
1
2
TV : 1
≥When the channel could not be received properly, adjust
the position and direction of the aerial.
3
Press [3, 4] to select "On" or "Off" when
the "Power Save" setting menu appears,
and press [OK].
≥On:
RQT9414
Downloaded From Disc-Player.com Panasonic Manuals
≥Off:
10
2
Channel reception settings and TV aspect settings
TV


VOL CH
DRIVE
SELECT
AV
PAGE
2 3
1
CH
6
4 5
ShowView
7 8 9
PROG/CHECK
DELETE
0 INPUT
SELECT
SKIP
SLOW/SEARCH
STOP PAUSE PLAY/x1.3
EXIT
STATUS
EXIT
FUNCTION MENU
OK
OPTION RETURN
RETURN
CREATE
MANUAL SKIP
CHAPTER
40), downloading from the television starts.
DVB Auto Setup
CH 5 69
Channel Name Type Quality
ABC TV 9
ABC 2 Data
9
Radio : 0 Data : 1
Power Save
On
Off
On : Minimises standby power
consumption; disables Quick
Start function and
AV2 loop-through in standby.
It will go into the Power Save mode when the unit
is in standby condition.
It is possible to start quickly from the standby
mode. (Quick Start mode)
The features of the power save function when the unit is in
standby mode are as below.
Power Save
Power consumption
Startup time
Watching the picture
(e.g. Pay TV) from the
device connected to AV2
"FL Display" is set to "Automatic" in the Setup menu.
§1
( 66)
It is possible to startup and start recording within several
§2
seconds.
– Depending on the type of TV or the connected terminal, it
may take time to display the screen.
If the TV aspect setting screen appears on the
television.
Press [3, 4] to select the TV aspect and press [OK].
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
( 85).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
( 85).
When television picture appears, set up is complete.
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system
4
Press [2, 1] to select "Yes" and
press [OK].
Post Code
Current Country : XXXXXX
This unit downloads GUIDE Plus+ data
several times a day.
CHANGE
Number
OK

0 9
RETURN
5
Press the numbered buttons or
[3, 4, 2, 1] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about
30 minutes.
6
When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN ].
∫ If the clock setting menu appears
Set the clock manually ( 68).
∫ To confirm that stations have been tuned
correctly ( 64)
∫ To restart set up ( 63)
[For]Germany[and]Austria[
On screen messages are displayed in German in the factory
preset. After completing step 6, change the on-screen display
to English in the following steps.
1 Press [FUNCTION MENU].
2 Press [3, 4] to select "Weit. Funktionen" and press [OK].
3 Press [3, 4] to select "Setup" and press [OK].
4 Press [3, 4] to select "Display" and press [1].
5 Press [3, 4] to select "Sprachauswahl" and press [OK].
6 Press [3, 4] to select "English" and press [OK].
7 Press [EXIT].
Off
On
§1
Approx. 0.9 W Approx. 15 W
Not Quick Quick
§2
Cannot do Can do
19)