Table of Contents
Advertisement
2
STEP
Channel reception settings and TV aspect settings
Numbered
buttons
,,,
OK
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [Í] to turn the unit on.
When connecting to a television that has the VIERA Link or Q
Link functions (
You can download the tuning positions from the television for
the channels in this unit's channel coverage.
If the Country setting menu appears on the television.
Press [3, 4] to select the country and press [OK].
[For]Germany[and]Austria[
The "Aktive Antenne" setting menu appears.
Press [3, 4] to select "Ein" or "Aus" and press [OK].
When using indoor antenna that is not equipped with power
supply, select "Ein".
If the Auto setup menu appears on the television.
Press [3, 4] to select "Digitale & analoge Sender" or
"Digitale Sender" and press [OK].
≥Digitale & analoge Sender
(Digital & Analogue channels):
Perform the analogue Auto-Setup after performing the DVB
Auto Setup.
≥Digitale Sender (Digital channels):
Perform the DVB Auto Setup. (analogue Auto-Setup is not
performed)
"DVB Auto-Setup" starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
DVB Auto-Setup
Suchlauf
Kan 5
Kanal
Sendername
1
ABC
2
ABC 2
3
Press [3, 4] to select "Ein", "Aus" or
"Zeitauswahl" and press [OK] when
the "Energiesparmodus" setting
menu appears.
Energiesparmodus
Energiesparmodus
Von
0
:00
Minimiert Stromverbrauch im Standby-Modus
d
h D k i i
Ein
It will go into the Power Save in Standby mode
(On):
when the unit is in standby mode.
Aus
It is possible to start quickly from the standby mode.
(Off):
(Quick Start mode)
Zeitauswahl (On Timer):
Press [3, 4, 2, 1] to set the start and stop time
and then press [OK].
≥"Energiesparmodus" is set to activate during the
setting time period.
VQT2J52
10
TV
VOL
DRIVE
CH
SELECT
AV
TRACKING/V-LOCK/PAGE
1
1
2
2
3
3
CH
6
6
4
4
5
5
8
8
9
9
ShowView
7
7
0
0
PROG/CHECK
DELETE
INPUT
SELECT
RESET
SLOW/SEARCH
SKIP/INDEX
REW
FF
STOP
PAUSE
PLAY
STATUS
EXIT
OK
OK
OPTION
RETURN
RETURN
MANUAL SKIP
42), downloading from the television starts.
69
Typ
Qualität
9
TV
Daten
9
Ein
Bis
6
:00
d S h ll
The features of the Power Save in Standby function when
the unit is in standby mode are as below.
Energiesparmodus
(Power Save in
Standby)
Power consumption
Startup time
Watching the picture
(e.g. Pay TV) from the
device connected to AV2
"Unit's Display" is set to "Automatic" in the Setup menu.
§1
(
65)
It is possible to startup and start recording within several
§2
seconds.
– Depending on the type of TV or the connected terminal, it
may take time to display the screen.
When "RF OUT ( Aerial Signal )" is set to "Off" in the
§3
Setup menu (
68)
If the TV aspect setting screen appears on the
television.
Press [3, 4] to select the TV aspect and press [OK].
≥16:9:
When connected to a 16:9 widescreen television.
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(
85).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(
85).
When television picture appears, set up is complete.
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system
4
Press [2, 1] to select "Ja" and press
[OK].
Postleitzahl
Gewähltes Land : XXXXXX
Dieses Gerät aktualisiert die
GUIDE Plus+ Daten
mehrmals pro Tag.
5
CHANGE
Press the numbered buttons or
[3, 4, 2, 1] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about 30 minutes.
6
When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN
].
∫ If the clock setting menu appears
Set the clock manually (
67).
∫ To confirm that stations have been tuned
correctly (
63)
∫ To restart set up (
62)
[For]Germany[and]Austria[
On screen messages are displayed in German in the factory
preset. After completing step 6, change the on-screen display
to English in the following steps.
1 Press [FUNCTION MENU].
2 Press [3, 4] to select "Weit. Funktionen" and press [OK].
3 Press [3, 4] to select "Setup" and press [OK].
4 Press [3, 4] to select "Display" and press [1].
5 Press [3, 4] to select "Sprachauswahl" and press [OK].
6 Press [3, 4] to select "English" and press [OK].
7 Press [EXIT].
Activated ( Ein /
Deactivated
( Aus )
Zeitauswahl)
§1
Approx. 0.5 W
Approx. 14 W
§3
Not Quick
Quick
§2
Cannot do
Can do
21)
Hide quick links:
Advertisement
Table of Contents
