Basic Connection - Panasonic Viera TX-LF37E30 Operating Instructions Manual

Basic Connection

External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting aerial
TV only
Rear of the TV
■
To loosen :
AC 220-240 V
50 / 60 Hz
Bundle the cables
Mains lead
hooks
To remove from the TV:
•
Do not bundle the RF cable and mains lead together (could cause distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option's assembly manual to fix cables.
Note
•
Connect to the TV's AV1 for a DVD Recorder / VCR supporting Q-Link (p. 82).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI
cable (p. 89).
•
Q-Link and VIERA Link connection
•
Please also read the manual of the equipment being connected.
•
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise,
distortion of image / sound may occur or operation of other equipment may be interfered.
10
Terrestrial aerial
Cable
RF cable
How to use the clamper
bundling the mains lead
Keep pushing the
knob
knob
Set the tip in the
hooks
snaps
Keep pushing both side
snaps
(p. 80, 81)
Example 2
Connecting DVD Recorder / VCR
TV, DVD Recorder or VCR
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
RF cable
DVD Recorder or VCR
RF OUT
RF IN
Terrestrial aerial
Cable
Fully wired
SCART cable
RF cable