Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
•
To connect the equipment
The remote control is capable of operating some functions of selected external equipment.
"Operating the equipment with the TV remote control" (p. 27)
TV
■
To return to TV
TV
26
(p. 10, 11, 89, 90)
Turn the TV on
1
When connecting with SCART as example 2 or 3 (p. 10, 11)
Receives input signals automatically when playback starts
•
Input signals are automatically identified by the SCART (pin 8) terminal.
•
This function is also available for HDMI connections (p. 89).
If input mode is not switched automatically
2
3
Perform
and
•
Check the setup of the equipment.
Display the input selection menu
2
AV
Select the input mode connected to the equipment
3
Input Selection
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
SD Card/USB
•
You can also select the input using the AV button on the remote control or the side
panel of the TV (except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
•
[SD Card/USB] : Switches to Media Player
•
You can label or skip each input mode (except [SD Card/USB]).
Skipped inputs will not be displayed when the AV button is pressed.
View
4
AV1
Displays the selected mode
Note
•
If the external equipment has an aspect adjustment function, set it to "16:9".
•
For details, see the manual of the equipment or ask your local dealer.
select
watch
"Using Media Player" (p. 57)
"Input Labels" (p. 48)