Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting
any leads.
TV only
AC 110 - 240 V,
50 / 60 Hz
Mains lead
Clamper
Bundle the cables
Set the tip
hooks
in the hooks
●
To loosen:
Keep pushing
knob
the knob
●
Do not bundle the RF cable
and mains lead together
(could cause distorted image).
●
Fix cables with clampers as
necessary.
●
When using the optional
accessory, follow the option's
assembly manual to fix
cables.
●
Mains plug types vary between countries.
●
Do not put the RF cable close to the mains lead to avoid noise.
●
Do not place the RF cable under the TV.
●
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial) and the
correct terminating plug are required.
●
If a communal aerial system is used, you may require the correct connection cable and plug
between the wall aerial socket and the TV.
●
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct
aerial system for your particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
●
VIERA Link connection
●
Read the manual of the equipment, too.
8
●
Other equipment connection
Connecting aerial
Rear of the TV
To remove from the TV
snaps
Keep pushing
both side snaps
●
Attach the clamper:
hole
Insert the clamper
in a hole
p. 53
p. 58, 59
Aerial
RF cable