Panasonic Viera TX-LF37E30 Operating Instructions Manual page 31

Menu Item
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to
Defaults
Gamma
Reset to
Defaults
Intelligent Frame
Creation
24p Smooth Film
Film Cadence
Detection
Resolution Enhancer
16:9 Overscan
AV Colour System
DVI Input Setting
Reset to Defaults
Adjustments / Configurations (alternatives)
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve [1.8] / [2.0] / [2.2] / [2.4] / [2.6]
•
Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Automatically compensates the picture frame rate and removes juddering movements
to make the images smooth [Off] / [Mid] / [Max]
•
Depending on the contents, images may be noisy. To prevent the noise, change the
setting.
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of PC input, photo or network service operations.
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Mid] / [Max]
•
This is available only for 24p signal input and displayed instead of [Intelligent Frame
Creation].
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of PC input, photo or network service operations.
Automatically makes the film source movie images clear [Off] / [On]
Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect mode is set
to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].
•
Not valid on VIERA Connect and Media Player
Selects the screen area displaying the image [Off] / [On]
[On] :
Enlarged the image to hide the edge of the image.
[Off] :
Displayed the image in the original size.
•
Set to [On] if noise is generated on the edge of the screen.
•
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
•
This function can be memorized separately for SD (Standard definition) and HD (High
definition) signals.
Selects optional colour system based on video signals in AV mode
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
Changes the black level in the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
•
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Press the OK button to reset the present Picture Viewing Mode of the selected input to
the default settings
31