Fine Adjusting Equalizer Curve; Adjusting Bass; Adjusting Treble - Pioneer DEH-P8450MP Operation Manual

Audio Adjustments

Fine adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ-Low/EQ-Mid/EQ-High
Level (dB)
Center frequency Frequency (Hz)
1 Press to open the front panel.
OPEN
2 Press and hold until frequency and
AUDIO
the Q factor (e.g.,
F 80 Q 1W
display.
3 Press to select the desired band for
AUDIO
adjustment.
low—mid—high
4 Press 2 or 3 to select the frequency.
Press 2 or 3 until the desired frequency
appears in the display.
low : — — —
40 80 100 160
mid : — — —
200 500 1 k 2 k
high : — — —
3.15 k 8 k 10 k
5 Press 5/∞ to select the desired Q factor.
Press 5 or ∞ until the desired Q factor appears
in the display.
— — —
2 N 1 N 1 W 2 W
Note
• If you make adjustments when a curve other
than is selected,
CUSTOM2
is updated.
Q=2W
Q=2N
) appears in the
(Hz)
(Hz)
(Hz)
12.5 k
curve
CUSTOM1

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
).
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press
OPEN
2 Press
AUDIO
Press until
AUDIO
3 Press 2 or 3 to select the frequency.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
40 63 100 160
4 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level.
+6
increased or decreased.

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In and
FRT1 FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press
OPEN
2 Press
AUDIO
Press until
AUDIO
3 Press 2 or 3 to select the frequency.
Press 2 or 3 until the desired frequency
appears in the display.
— — —
2.5k 4k 6.3k
to open the front panel.
to select .
Bass
appears in the display.
Bass
(Hz)
– is displayed as the level is
–6
modes, treble adjustment
to open the front panel.
to select .
Treble
appears in the display.
Treble
(Hz)
10k
Section
07
En 39