Tape Operation; Tuner Operation - Pioneer VSX-D3S Operating Instruction

TAPE operation

1 POWER button:
Switches cassette deck power ON/OFF.
2 1 (FF) button:
Rapidly advances the tape in the direction of the arrow.
3 7 (STOP) button:
Stops the tape transport.
4 8 (PAUSE) button:
Temporarily stops tape transport. Press again to resume
tape transport.
5 ¡ (FF) button:
Rapidly advances the tape in the direction of the arrow.
6 3 (PLAY) button:
Selects playback.
NOTE:
On a Pioneer double deck, you can operate Deck II.
REMOTE CONTROL OPERATION

Tuner operation

2 ST – (Station Down) button:
Used for recalling memorized stations.
3 FQ – (Frequency Down) button:
Shifts the frequency down.
4 FQ + (Frequency Up) button:
Shifts the frequency up.
5 ST + (Station Up) button:
Used for recalling memorized stations.
6 Band button:
Switches the FM and AM bands in turn.
Auto tuning:
Press FQ + (up) or – (down) button until the frequency starts to
change, then release it. The tuner will automatically search for
a broadcasting station and stops when one is found, and the
TUNED indicator lights up. To search for another station, press
again.
Manual tuning:
Press FQ + (up) or – (down) button and release quickly. The
tuning frequency will change by one step each time the button
is pressed. Press as many times as necessary to tune in the
desired station. The TUNED indicator lights up when the station
is tuned in best.
÷ If you keep the FQ (up/down) button depressed after the
frequency has began to change, the reception frequency
changes continuously, and stops when the button is released.
NOTE:
When AUTO TUNING is in use, reception may not be possible
over long distances or when signals are weak. At these times
MANUAL TUNING is recommended.
23
< >
ARB7050