Table of Contents
Advertisement
09
Other connections
Connecting using the
component video output
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV.
give you the best quality picture from the three
types of video output available.
•
Use a component video cable to connect
the COMPONENT VIDEO OUT to a set of
component inputs on your TV.
TV
ANTENNA
FM
AM LOOP
UNBAL75 Ω
IN
MCACC
MIC
CONTROL
The illustration shows the XV-DV353 model.
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Note
1 The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 27.
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti-
facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the 'standard definition' output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
3 This system is compatible with all Pioneer plasma displays from 2003 onward.
4 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable.
32
En
1
This should
COMPONENT
INPUT
C
/
R
P
R
COMPONENT
VIDEO
C
/
B
VIDEO
P
B
S-VIDEO
Y
VIDEO OUT
Compatibility of this player with
progressive-scan and high-definition TVs
This player is compatible with progressive
video Macro Vision System Copy Guard.
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display
4
use an SR+ cable
to connect it to this unit
and take advantage of various convenient
features, such as controlling this unit via the
plasma display's remote sensor, automatic
video input switching of the plasma display,
and automatic volume muting on the plasma
display.
Media receiver
CONTROL
OUT
Pioneer plasma display
ANTENNA
VIDEO
FM
UNBAL75 Ω
AM LOOP
IN
S-VIDEO
MCACC
MIC
CONTROL
The illustration shows the XV-DV353 model.
2
3
, you can
C
/
R
P
COMPONENT
R
VIDEO
C
/
B
P
B
Y
VIDEO OUT
Hide quick links:
Advertisement
Table of Contents
