Connecting To Your Tv; Connecting Using The Component Video Output - Pioneer CX303 Operating Instructions Manual

02 Connecting up
External FM antenna
Use a PAL connector to hook up an external
FM antenna.
ANTENNA
FM
UNBAL 75 Ω
AM LOOP

Connecting to your TV

This system offers three types of video
connections. If your TV has component video
inputs, see Connecting using the component
video output below.
1 Use the supplied yellow video cable to
connect the VIDEO OUT jack to a video input
on your TV.
2 Optionally: Use a stereo audio cable to
connect the audio outs of your TV (or VCR) to
the LINE IN jacks on the rear of this unit.
This will enable you to hear the TV (or VCR)
sound through this system. See Connecting
auxiliary components below for more on this.
Note
1 The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 42.
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the 'standard definition' output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
14
En
Connecting using the component
video output
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV.
give you the best quality picture from the three
types of video output available.
PAL connector
•
the COMPONENT VIDEO OUT to a set of
component inputs on your TV.
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Compatibility of this player with
progressive-scan and high-definition TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
Use a component video cable to connect
Y
S-VIDEO
VIDEO
P
B
COMPONENT
P
R
VIDEO
VIDEO OUT
1
This should
T o C omponent
input
2