Connecting Using The S-Video Output; Connecting Using The Component Video; Output; About Progressive Scan Video - Pioneer S-DV440 Operating Instructions Manual

11 Other connections
• When Recording mode is off, the audio
from the analog output may be interrupted,
depending on the operation.
• The Recording mode automatically
switches off if you change the input
function (DVD/CD, TUNER, etc.) or switch
the power off.
Connecting using the S-video

output

If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
OPTICAL IN
AUDIO
LINE 2
S-VIDEO VIDEO
OUT OUT
VIDEO
Note
• The S-video output is switchable between
S1 and S2 formats for compatibility with all
TVs. See Video Output settings on page 48
to change this setting.
54
En
S-VIDEO
INPUT
XV–DV440/740
IN
CONTROL
FM AM
ANTENNA
UNBAL 75Ω LOOP ANTENNA
Y P P
B R
COMPONENT VIDEO OUT
Connecting using the
component video output
If your TV has component video inputs, you can
use these instead of the standard video output
to connect this system to your TV. This should
give you the best quality picture from the three
types of video output available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
TV
IN
CONTROL
FM
ANTENNA
UNBAL 75Ω
Y P
B
COMPONENT VIDEO OUT
Note
• The component video output is switchable
between interlaced and progressive
formats. See Video Output settings on
page 48 for more on this.

About progressive scan video

Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
COMPONENT
INPUT
XV–DV440/740
AM
LOOP ANTENNA
P
R