Connections - Panasonic KX-TG8070E Operating Instructions Manual

TG8070-8090E(e).book Page 9 Monday, June 11, 2007 8:12 PM

Connections

Base unit (KX-TG8070)
To telephone
network
To AC mains outlet
(220–240 V, 50 Hz)
Use only the supplied AC adaptor and
telephone line cord. Insert the AC
adaptor plug until a short beep sounds.
Base unit (KX-TG8090/KX-TG8092/KX-TG8093)
To AC mains outlet
(220–240 V, 50 Hz)
To telephone
network
Use only the supplied AC adaptor and
telephone line cord. Insert the AC
adaptor plug until a short beep sounds.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Charger (KX-TG8092/KX-TG8093)
The charger can be mounted on the wall, if
required.
Hook
Note:
L Never install telephone wiring during a lightning
L The AC adaptor must remain connected at all
L The AC adaptor should be connected to a
L The unit will not work during a power failure.
Hook
Location
L For maximum distance and noise-free
25 mm
Screws
storm.
times. (It is normal for the adaptor to feel warm
during use.)
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
We therefore recommend you also connect a
corded-type telephone (without AC adaptor) to
the same telephone line using a T-adaptor. Your
Panasonic sales shop can offer you more
information about connection possibilities.
operation, place your base unit:
– away from electrical appliances such as TVs,
radios, personal computers or other phones.
– in a convenient, high and central location.
Preparation
To AC
mains outlet
(220–240 V,
50 Hz)
9