Swap; Av Selection - Panasonic TX-21CK1L Operating Instructions Manual

Swap --- Programme swapping
The Swap option allows you to swap two programme positions.
Press the F button.
Select Setup menu.
Access Setup menu.
Select Tuning menu.
Access Tuning menu.
Select Programme Swap.
Access Programme Swap.
Select first programme position.
Move down to "Programme 02 row".
Select second programme position.
Confirm by pressing the TV/AV button.
Press the N button to exit.
AV selection --- AV mode
To select AV mode press the TV/AV button. If another receiver is connected to the AV connectors (VCR, Satellite
`
Receiver, camera, etc. see page 20) and if it is in operation, its signal will be displayed and AV will appear in the top
left corner of the TV screen regardless of the selected programme position (TV tuner is ignored).
This TV may automatically switch over to the AV mode if the connected device sends a switch signal to the SCART
`
cable connector. In this case a signal from the connected audio/video device will be displayed and "EC1" will
appear in the upper left corner of the screen. The output displayed will not change if you change the TV channel.
You may switch back to the television by pressing the TV/AV button or by disconnecting the AV device.
`
Do not connect two AV devices to the TV simultaneously, as their signals will overlap.
`
In the AV mode the Setup Menu OSD is extended to include Volume Correction.
`
If an NTSC signal is connected via the AV input the TV will automatically detect the signal and switch over to the
`
NTSC standard. The Main Menu OSD is extended to include Tint, which may be adjusted with buttons "+" and
"-- ".
16
Programme Swap
Programme 01 CH44
with
Programme 02 CH41
Return
BBC1
ITV

Swap

Select
Adjust
Exit