Table of Contents
Advertisement
Tuning --- Manual Tuning
The programme positions may be tuned manually either via the on screen menu or via the buttons on
the TV front panel.
Press the F button.
Select Setup menu.
Access Setup menu.
Select Tuning menu.
Access Tuning menu.
Select Manual tuning.
Access Manual tuning.
Select the programme position to be
tuned.
Start tuning.
When the required programme is found
save it by pressing either the TV/AV or STR
(on the front panel) button.
Press the N button to exit.
Manual tuning (front panel)
Press the F button until "Manual tuning" is
displayed.
Press the "---" or "+" button to access
"Manual tuning".
Press the TV/AV button to move between
"Programme" or "Search".
By pressing buttons or change the
programme position or start the search.
When the required station is found press
button STR to save the changes.
Repeat the above procedure to tune in
additional programmes, or finish the tuning
by pressing the F button.
14
1
CH44
Tuning Menu
Auto Setup
Manual Tuning
Fine Tuning
Programme Swap
Child Lock
Owner ID
1
CH44
Manual Tuning
21
STR
Notes:
If you know the channel numbers of your
broadcasting stations you may use direct channel
F
selection by using button "C" on the remote control
unit to save the channels quickly:
--- enter Manual Tuning menu;
--- set the programme number;
---
+
--- press the C button;
--- set the channel number with the numeric
buttons;
--- save with the TV/AV button;
--- leave the menu by pressing N button.
If you want to use direct channel selection in the
"Hyperband" (cable TV), push the direct channel
selection button and programme position button
("C" and "---/ --- ---") one after the other and set the
number with the numbered buttons. "CH--- ---" will
first appear in the left top corner of the screen, and
then "H:--- ---". For saving see above.
STR
F
Access
Off
Store
Select
Access
Return
Exit
68
Store
Programme
Search
Return
Exit
Advertisement
Table of Contents
