Table of Contents
Advertisement
Swap Button-
Press the SWAP button (when the
PIP frame is displayed) to interchange what is being
viewed on the Main Picture with that of the PIP frame.
PIP (Picture
in Picture)
Button -This
feature allows monitoring one channel while watching
another when a second video source with a tuner is
connected (such as a VCR) to the television.
NOTE: When the Main Picture is in Video mode with no
signal, the PIP will not operate properly.
S_AP
PIP VIDEO
VIDEO
PIP CH 2
PIP
PIP Operation
1.
Turn VCR ON and select a desired channel.
2.
Press the TV Mode Selection button to operate the
Remote function, if necessary.
3.
Press the PIP button (television must be ON). The
PIP frame will appear at the position it was last
displayed. The Main Picture Video Source and PIP
Video Source will display on screen momentarily.
Audio will be that of Main Picture.
Main
Picture
with
Sound
Main Picture
CH 2' _
Channel
PIP VIDEO"
_
Picture in
Picture
Video Mode
[_,
Picture in
_----
Picture
Frame
4.
Press the PIP button again to cancel PICTURE IN
PICTURE feature.
NOTE: For PIP Video source connection, refer to PIP
Antenna and External Video connection section.
• Audio will be that of the Main Picture.
Size Button
-
Press the SIZE button (when the
PIP frame is displayed) to choose either the large or
small PIP frame.
Large PIP Frame
Small PiP Frame
-16-
Advertisement
Table of Contents
