Setting Power Management - Panasonic Toughbook CF-27 Series Reference Manual

Computing On The Road
NOTE
If you plan to use only the battery pack or set the power management, it is neces-
sary to check [Allow Windows to manage power use on this computer] in [Start]
- [Settings] - [Control Panel] - [Power].
If the check is removed, the time may not be displayed properly when operation is
resumed from the suspend or hibernation mode or the operating time with the
battery pack may become short (the power management function of Windows
does not work).

Setting Power Management

1
Run the Setup Utility
2
Using and
3
Using and
press Enter
4
Using and
[Enable(Always)] and press Enter
5
Using and
6
Using and
and press Enter
7
Using and
Timeout] and press Enter
8
Using and
press Enter
9
Press F10 , then select [Yes]
( page 34)
, select [Power]
, select [Power Management Mode] and
, select either [Enable(Battery)] or
, select [Power Switch] and press Enter
, select either [Suspend] or [Hibernation]
, select [Suspend Timeout] or [Hibernation
, select either [4 min] or [16 min] and
14